Printed in the Federal Republic of Germany
TR-Electronic GmbH 2013, All Rights Reserved
11/07/2018
TR - ECE - BA - DGB - 0104 - 07
Page 81 of 136
4.1.2 Bus termination
If the measuring system is the last slave
in the PROFIBUS segment, the bus is
to be terminated with the termination
switch = ON. In this state, the
subsequent PROFIBUS is decoupled.
4.1.3 Bus address
Valid PROFIBUS addresses: 3 - 99
10
0
: Setting the 1st position
10
1
: Setting the 10th position
The device does not start up with an
invalid station address, LEDs = OFF.
