TPS 900-I3 Manual Download Page 30

Page: 30 / 48

9.3 Erasing Records from the Notepad

To erase records from the Notepad…

Select the Erase Notepad menu (

→

F2:Notepad

→

F2:Erase

)

The

900-I3

now displays the Erase menu, for example…

Erase Notepad, ( 100 ) Select Option

Erase Notepad, ( 100 ) Select Option
F1:Erase All F2:Erase Last Menu Exits

F1:Erase All F2:Erase Last Menu Exits

The number of readings stored in the Notepad is displayed. See the “

100

” in the example

above.

Press

to erase all of the readings stored in the Notepad.

Press

to erase the last recorded reading only.

Press

to quit without erasing any records.

9.4 Printing Records from the Notepad to the RS232 Port

This function is only available when the optional RS232 port is fitted.

Connect one end of the RS232 cable to the

RS232/Recorder

socket of the

900-I3

Connect the other end of the RS232 cable to an RS232 Printer, or to the COM1 or COM2 ports
of a PC.

Ensure that the baud rate for the printer or PC and the

900-I3

are the same. If necessary, alter

the baud rate of the

900-I3

(see section 11.1).

The

900-I3

uses XON/XOFF protocol. Ensure that the printer is set accordingly.

Select the Notepad menu. (

→

F2:Notepad

Select

F3:Print

from the menu.

Printing starts as soon as

is pressed. The display shows the word “

Printing

” until printing

is completed.

Summary of Contents for 900-I3

















































Search results

Summary of Contents for 900-I3

Reviews:

TPS 900-I3, Manual, Page: 30 / 48

Search results

Summary of Contents for 900-I3

Reviews: