7. REVIEWING DATA
1. Press the
Recall Key
once
and the following screen will be
displayed:-
‘FLuE’
will be flashing on the display. If you wish to review
any other data then press the
UP or Down
Arrow Keys
to scroll through
“tE P”
, temperature
or
“PrSu”
, Pressure
or
“CAL”
, Date of Last Calibration
2.
Press the
Enter Key
once
and
if you have chosen to view the
Last
Time Calibrated Date
(CAL)
then the Date that the Last Time the 717R
was calibrated will be displayed on the screen.(Go To Step 6)
3.
However
if you have chosen to view Flue, Temperature or Pressure
Readings then
‘Addr’
will be displayed and a location number will be
flashing.
4. Select the required address location that you wish
to review by pressing the Up and Down
Arrow Keys.
5. Press the
Enter Key
once and
the
Time & Date
of the Saved Data
from the selected address location
will be displayed on the screen.
**
If there is no data present at that location then
‘no dAtA’
will be
displayed**
6. The rest of the Saved Data at this address location can be reviewed
by pressing the Enter Key Repeatedly
7.
Press the
Func Key
once to be returned to the screen you
were originally on.
8.
To review further data on the screen start again at Step 1 above
Summary of Contents for 717R
Page 1: ...TPI 717R Combustion Flue Gas Analyser ...
Page 31: ......
