Your temperature-sampling probe comes complete with an In-Line Water Trap
Bowl Filter as standard.
This consists of a Particle Filter in
the Bowl Compartment and a Disc
Filter in the Lid (as shown in the
diagram across). The Disc Filter in
Lid will prevent any excessive water
from entering the 717R Combustion
Analyser if used correctly.
If you are working with
OIL
then you
MUST
ensure that you also use the optional
Oil Filter as shown below.
Failure to do so will result in erroneous readings.
If any of the filters
become excessively dirty or blocked then the
following screen will be displayed as a warning and no further
readings will be able to be taken until either the dirty filters are
replaced or the blockage removed:-
The 717R will also give off an audible Beeping Alarm
to warn that a “FLo Err” is being detected
Summary of Contents for 717R
Page 1: ...TPI 717R Combustion Flue Gas Analyser ...
Page 31: ......
