32
Logging Parameters 367D Only (continued)
1. To change the logging stop time, press and hold the MENU key
down to activate menu mode until the 367 beeps and “EDIT” is dis-
played.
2.
Press the menu key repeatedly until logger start time mode is dis-
played. See below.
3.
To set the stop time press the RIGHT ARROW key to set the desired
value in seconds. Holding the key down will increase the value
rapidly. Press the LEFT ARROW key and the minutes digits will
blink. Press the RIGHT ARROW key to set the desired value. Press
the LEFT ARROW key to cycle to the hour digits. Press the RIGHT
ARROW key to set the desired value.
4.
After the desired stop time is set press the MENU key to go to the
next selection or press and hold the MENU key to exit menu mode.
Summary of Contents for 367
Page 1: ...367 367D Thermometer Instruction Manual ...
Page 36: ...36 ...
