30
E. Logging Parameters (367D Only)
1. To change the logging interval, press and hold the MENU key down
to activate menu mode until the 367 beeps and “EDIT” is displayed.
2.
Press the menu key repeatedly until logger interval mode is dis-
played. See below.
3.
To set the interval press the RIGHT ARROW key to set the desired
value in seconds. Holding the key down will increase the value
rapidly. Press the LEFT ARROW key and the minutes digits will
blink. Press the RIGHT ARROW key to set the desired value. Press
the LEFT ARROW key to cycle to the hour digits. Press the RIGHT
ARROW key to set the desired value.
4.
After the desired interval is set press the MENU key to go to the
next selection or press and hold the MENU key to exit menu mode.
Summary of Contents for 367
Page 1: ...367 367D Thermometer Instruction Manual ...
Page 36: ...36 ...
