26
Menu Mode (continued)
Over/Under temperature alarm
The over/under alarm can be used to alert you when the measured tem-
perature is above or below a set point. This mode is used with the gap
setting. (See next page)
1. To activate menu mode, press and hold down the MENU key until
the 367 beeps and “EDIT” is displayed.
2.
Press the menu key repeatedly until over temperature alarm mode
is displayed (see display below).
3.
Press the RIGHT ARROW key to activate (Lt-yes) or deactivate (Lt-
no) the over temperature alarm.
4.
To increase the alarm point press the LEFT ARROW key until Lt-uP
is displayed. Press the RIGHT ARROW key to increase the displayed
value. Holding the RIGHT ARROW key down increases the display
rapidly.
5.
To decrease the alarm point press the LEFT ARROW key until Lt-dn
is displayed. Press the RIGHT ARROW key to decrease the dis-
played value. Holding the RIGHT ARROW key down decreases the
display rapidly. After the desired alarm point is set press the MENU
key to go to the next selection or press and hold the MENU key to
exit menu mode.
Summary of Contents for 367
Page 1: ...367 367D Thermometer Instruction Manual ...
Page 36: ...36 ...
