TP-Link WA801ND User Manual Download Page 44

Page: 44 / 54

Chapter 4

Configure the Access Point

4. 5. 4. Firmware Upgrade

TP-Link is dedicated to improving and richening the product features, giving users
a better network experience. We will release the latest firmware at TP-Link official
website. You can download the latest firmware file from the

Support

page of our website

www.tp-link.com

and upgrade the firmware to the latest version.

1. Download the latest firmware file for the access point from our website

www.tp-link.

com

2. Visit

http://tplinkap.net

, and log in with the username and password you set for the

access point.

3. Go to

System Tools

Firmware Upgrade

4. Click

Browse

to locate the downloaded firmware file, and click

Upgrade

4. 5. 5. Factory Defaults

1. Visit

http://tplinkap.net

, and log in with the username and password you set for the

access point.

2. Go to

System Tools

Factory Defaults

. Click

Restore

to reset all settings to the

default values.

• The default

username

: admin

• The default

password

: admin

• The default

IP Address

: 192.168.0.254

• The default

Subnet Mask

: 255.255.255.0

Summary of Contents for WA801ND























































Search results

Summary of Contents for WA801ND

Reviews:

Related manuals for WA801ND

Brands by name

Popular brands

TP-Link WA801ND, User Manual

Search results

Summary of Contents for WA801ND

Reviews:

Related manuals for WA801ND

Brands by name

Popular brands