TL-WR941ND
Wireless N Router
Figure 4-64 Binding Setting
¾
MAC Address
-
The MAC address of the controlled computer in the LAN.
¾
IP Address -
The assigned IP address of the controlled computer in the LAN.
¾
Bind
-
Check this option to enable ARP binding for a specific device.
¾
Modify
-
To modify or delete an existing entry.
When you want to add or modify an IP & MAC Binding entry, you can click the
Add New
button
or
Modify
button, and then you will go to the next page. This page is used for adding or
modifying an IP & MAC Binding entry
(shown in
Figure 4-65
).
Figure 4-65 IP & MAC Binding Setting (Add & Modify)
To add IP & MAC Binding entries, follow the steps below.
1. Click
the
Add New...
button as shown in Figure 4-62.
2. Enter the MAC Address and IP Address.
3. Select the Bind checkbox.
4. Click
the
Save
button to save it.
To modify or delete an existing entry, follow the steps below.
1. Find the desired entry in the table.
2. Click
Modify
or
Delete
as desired on the
Modify
column.
To find an existing entry, follow the steps below.
1. Click
the
Find
button as shown in Figure 4-64.
-76-
