74
Chapter 5
&RQƮJXUHWKH5RXWHULQ$FFHVV3RLQW0RGH
•
Channel
- The current wireless channel.
•
Mode
- The current wireless mode which the router works on.
•
Channel Width
- The current wireless channel width.
•
MAC Address
- The physical address of the router.
•
Traffic Statistics
- The router’s traffic statistics.
•
Received (Bytes)
- Traffic in bytes received from the WAN port.
•
Received (Packets)
- Traffic in packets received from the WAN port.
•
Sent (Bytes)
- Traffic in bytes sent out from the WAN port.
•
Sent (Packets)
- Traffic in packets sent out from the WAN port.
•
System Up Time
- The length of the time since the router was last powered on or
reset.
Click
Refresh
to get the latest status and settings of the router.
5. 2.
WPS
WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a wireless
network. This section will guide you to add a new wireless device to your router’s
network quickly via WPS.
Note:
The WPS function cannot be performed if the wireless function of the router is disabled. Please make sure the wireless
function is enabled before configuration.
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the router.
2. Go to
WPS
.
3. Follow one of the following three methods to connect your client device to the router’s Wi-Fi
network.
Method ONE: Press the WPS Button on Your Client Device
1. Keep the WPS Status as
Enabled
and click
Add Device
.