31
Chapter 4
&RQƮJXUHWKH5RXWHULQ6WDQGDUG:LUHOHVV5RXWHU
•
152-bit
- Enter 32 hexadecimal digits (any combination of 0-9, a-f and A-F. Null
key is not permitted) or 16 ASCII characters.
4. 5. 3.
Wireless MAC Filtering
Wireless MAC Filtering is used to deny or allow specific wireless client devices to access
your network by their MAC addresses.
Deny or allow specific wireless client devices to access my
network by their MAC addresses.
For example
, you want the wireless client A with the MAC
address 00-0A-EB-B0-00-0B and the wireless client B with the
MAC address 00-0A-EB-00-07-5F to access the router, but
other wireless clients cannot access the router.
1.
Visit
http://tplinkwifi.net
, and log in with the username and
password you set for the router.
2.
Go to
Wireless
>
Wireless MAC Filtering
.
3.
Click
Enable
to enable the Wireless MAC Filtering function.
4.
Select
Allow the stations specified by any enabled entries in
the list to access
as the filtering rule.
5.
Delete or disable all entries if there are any entries already.
6.
Click
Add New
and fill in the blanks.
1 ) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-
00-07-5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Leave the status as
Enabled
.
4 ) Click
Save
and click
Back
.
7.
The configured filtering rules should be listed as the picture
shows below.
I want to:
How can I
do that?
