116
2 ) Click
Save
.
Note:
Log in to the web management page again if the IP address of the router has been altered.
3. Survey the SSID to be bridged:
1 ) Go to
Wireless
>
Wireless Settings
and click
Enable WDS Bridging
.
2 ) Click
Survey
, locate the host router’s SSID and click
Choose
(here we take
TP-Link_2512 for example).
3 ) If the host router is set with a wireless password, you should enter its wireless
password.
4 ) Click
Save
.
4. Disable DHCP: Go to
DHCP
,
select
Disable
,
and click
Save
.
Now you can go to
Status
to check the WDS status. When the
WDS status
is
Run
, it
means WDS bridging is successfully built.
