35
Chapter 4
&RQƮJXUHWKH5RXWHULQ6WDQGDUG:LUHOHVV5RXWHU
•
Enable Guest Network Bandwidth Control
- If enabled, the Guest Network
Bandwidth Control rules will take effect.
•
Egress Bandwidth For Guest Network
- The upload speed through the WAN
port for the guest network.
•
Ingress Bandwidth For Guest Network
- The download speed through the WAN
port for the guest network.
•
Guest Network
- Enable or disable this function.
•
Network Name
- Enter a value of up to 32 characters. The Network Name (SSID)
must be assigned to all wireless devices in your guest network.
•
Wireless Security
- You can configure the security of the guest network.
•
Access Time
- During this peroid the wireless devices can access the guest
network.
Note:
The range of bandwidth for guest network is calculated according to the setting of Bandwidth Control on the
Bandwidth Control
>
Control Settings
page.
4. 7.
DHCP
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
from the IP Address Pool. You can change the settings of DHCP Server if necessary,
and you can reserve LAN IP addresses for specified client devices.
4. 7. 1.
DHCP Settings
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the router.
2. Go to
DHCP
>
DHCP Settings
.
3. Specify DHCP server settings and click
Save
.
