TL-WR842ND
300Mbps Multi-Function Wireless N Router User Guide
- 5 -
)
Note:
After a device is successfully added to the network by WPS function, the WPS LED will keep on
for about 5 minutes and then turn off.
1.4.2
The Rear Panel
Figure 1-2 Rear Panel sketch
The following parts are located on the rear panel (View from left to right).
¾
POWER:
The Power socket is where you will connect the power adapter. Please use the
power adapter provided with this TL-WR842ND 300Mbps Multi-Function Wireless N Router.
¾
WAN:
This port is where you will connect the DSL/cable Modem, or Ethernet.
¾
1,2,3,4 (LAN):
These ports (1, 2, 3, 4) connect the Router to the local PC(s).
¾
USB:
The USB port connects to a USB storage device or a USB printer.
¾
WPS/RESET:
Press this button to quickly establish a connection between the Router and
client devices that support Wi-Fi Protected Setup. Press and hold this button for more than 5
seconds (approximately 8 seconds) to reset the Router.
There are two ways to reset to the Router's factory defaults:
1) Use the
Factory Defaults
function on “
System Tools
→
Factory Defaults
” page in the
Router's Web-based Utility.
2) Use the Factory Default
WPS/RESET
button: With the Router powered on, use a pin to
