TP-Link TL-WR842ND User Manual Download Page 112

Page: 112 / 130

TL-WR842ND

300Mbps Multi-Function Wireless N Router User Guide

- 103 -

Do not turn off the Router or press the Reset button while the firmware is being upgraded.

Loss of power during the upgrade could damage the Router.

The firmware version must correspond to the hardware.

The upgrade process takes a few moments and the Router restarts automatically when the

upgrade is complete.

4.18.4 Factory Defaults

Choose menu “

System Tools

→

Factory Defaults

”, and then and you can restore the

configurations of the Router to factory defaults on the following screen

Figure 4-102 Restore Factory Default

Click the

Restore

button to reset all configuration settings to their default values.

•

The default

User Name

: admin

•

The default

Password

: admin

•

The default

IP address

: 192.168.0.1

•

The default

Subnet Mask

: 255.255.255.0

)

Note:

All changed settings will be lost when defaults are restored.

4.18.5 Backup & Restore

Choose menu “

System Tools

→

Backup & Restore

”, and then you can save the current

configuration of the Router as a backup file and restore the configuration via a backup file as

shown in Figure 4-103.

Figure 4-103 Backup & Restore Configuration

Summary of Contents for TL-WR842ND



































































































































Search results

Summary of Contents for TL-WR842ND

Reviews:

Related manuals for TL-WR842ND

Brands by name

Popular brands

TP-Link TL-WR842ND, User Manual

Search results

Summary of Contents for TL-WR842ND

Reviews:

Related manuals for TL-WR842ND

Brands by name

Popular brands