TL-WR842ND
300Mbps Multi-Function Wireless N Router User Guide
- 67 -
Once the Router is configured, the operation is as follows:
1. A local host makes an outgoing connection to an external host using a destination port
number defined in the
Trigger Port
field.
2. The Router records this connection, opens the incoming port or ports associated with this
entry in the
Port Triggering
table, and associates them with the local host.
3. When necessary, the external host will be able to connect to the local host using one of the
ports defined in the
Incoming Ports
field.
)
Note:
1. When the trigger connection is released, the corresponding opened ports will be closed.
2. Each rule can only be used by one host on the LAN at a time. The trigger connection of other
hosts on the LAN will be refused.
3.
Incoming Ports
ranges cannot overlap each other.
4.10.3 DMZ
Choose menu “
Forwarding
→
DMZ
”, and then you can view and configure DMZ host in the screen
(shown in Figure 4-55).The DMZ host feature allows one local host to be exposed to the Internet
for a special-purpose service such as Internet gaming or videoconferencing. The Router forwards
packets of all services to the DMZ host. Any PC whose port is being forwarded must have its
DHCP client function disabled and should have a new static IP Address assigned to it because its
IP Address may be changed when using the DHCP function.
Figure 4-55 DMZ
To assign a computer or server to be a DMZ server:
1. Click
the
Enable
button.
2. Enter the IP address of a local PC that is set to be DMZ host in the
DMZ Host IP Address
field.
3. Click
the
Save
button.
4.10.4 UPnP
Choose menu “
Forwarding
→
UPnP
”, and then you can view the information about
UPnP
in the
screen (shown in Figure 4-56). The
Universal Plug and Play (UPnP)
feature allows the devices,
