TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 17 -
4. Click
Next
to continue, the Wireless settings page will appear as shown in Figure 3-12.
Figure 3-12 Quick Setup – Wireless
¾
Wireless Radio -
The wireless radio can only be enabled/disabled by using the WIFI
ON/OFF switch on the device.
¾
Wireless Network Name -
Enter a value of up to 32 characters. The same name of
SSID (Service Set Identification) must be assigned to all wireless devices in your
network. Considering your wireless network security, the default SSID is set to be
TP-LINK_XXXXXX (XXXXXX indicates the last unique six numbers of each Router’s
MAC address). This value is case-sensitive. For example,
TEST
is NOT the same as
test
.
¾
Region
-
Select your region from the drop-down list. This field specifies the region
where the wireless function of the Router can be used. It may be illegal to use the
wireless function of the Router in a region other than one of those specified in this field.
If your country or region is not listed, please contact your local government agency for
assistance.
)
Note:
Limited by local law regulations, version for North America does not have region
selection option.
¾
Disable Security -
The wireless security function can be enabled or disabled. If
disabled, the wireless stations will be able to connect the Router without encryption. It is
recommended strongly that you choose one of following options to enable security.
