TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 13 -
Figure 3-6 WAN Connection Type
The Router provides
Auto-Detect
function and supports five popular ways
Dynamic IP
,
Static IP
,
PPPoE/Russia PPPoE
,
L2TP/Russia L2TP
and
PPTP/Russia PPTP
to connect
to the Internet. It’s recommended that you make use of the
Auto-Detect
function. If you are
sure of what kind of connection type your ISP provides, you can select the very type and click
Next
to go on configuring.
)
Note:
Auto-Detect
function is not suitable for
Static IP
,
L2TP/Russia L2TP
and
PPTP/Russia
PPTP
, you need to specify the connection type manually.
3. If you select
Auto-Detect
, the Router will automatically detect the connection type your ISP
provides. Make sure the cable is securely plugged into the WAN port before detection. The
appropriate configuration page will be displayed when an active Internet service is
successfully detected by the Router.
1) If the connection type detected is
Dynamic IP
, the next screen will appear as shown in
Figure 3-7.
¾
In most cases you don’t need to clone the MAC address if you have rebooted the
modem with the new router, please select
No, I do NOT need to clone MAC
address
.
¾
If you can’t get the Internet connection after
Quick Setup
, please run it again and
select
YES, I need to clone MAC address
.
Then click
Next
and Figure 3-12 will appear.
