Configuration Guide
138
Configuring Authentication
Guest Resources Configuration
Note:
In a Guest Resource entry, if some parameter is left empty, it means the router will not restrict that
parameter. For example, if the source IP range is left empty, it means all the clients can visit the
specified guest resources.
5.2 Configuring the URL Type
Choose the menu
Authentication
>
Authentication Settings
>
Guest Resources
and click
Add
to load the following page.
Figure 5-1
Configuring the URL
Specify the client and the network resources the client can visit by configuring the URL of
the network resource and the parameters of the clients, then click
OK
.
Name
Enter the name of the guest resource entry.
Type
Choose the guest resource type as URL Type.
URL Address
Enter the URL address or IP address of the network resource that can be visited for
free.
Source IP Range
Configure the IP range of the client(s) by entering the network address and subnet
mask bits.
Source MAC
Address
Enter the MAC address of the client.
Source Port
Range
Enter the source service port range.
