Configuring Transmission
NAT Configurations
Configuration Guide
61
2.4 Configuring the Port Triggering
Choose the menu
Transmission > NAT > Port Triggering
and click
Add
to load the
following page.
Figure 2-4
Configuring the Port Triggering
Follow these steps to configure the Port Triggering
:
1) Specify the name of the Port Triggering rule and configure other related parameters.
Interface
Specify the effective interface for the rule.
Trigger Port
Enter the trigger port or port range. Each entry supports at most 5 groups of
trigger ports. For example, you can enter 1-2, 3-4, 5-6, 7-8, 8-9. Note that the
ports or port ranges cannot overlap with those of other port triggering rules.
Trigger Protocol
Specify the trigger protocol for the trigger port.
Incoming Port
Enter the incoming port or port range. Each entry supports at most 5 groups of
incoming ports. For example, you can enter 1-2, 3-4, 5-6, 7-8, 8-9. Note that the
ports or port ranges cannot overlap with those of other port triggering rules.
Incoming
Protocol
Specify the incoming protocol for the incoming port.
Status
Check the box to enable the rule.
2) Click
OK
.
