30
Chapter 7
Network Security
4.
Select a service type from the drop-down list and the following four fields will be
auto-populated. Select
Custom
when your desired service type is not listed, and
enter the information manually.
5.
Specify the IP address(es) that this filtering rule will apply to.
6.
Click
Save
.
7. 3.
Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
Block or allow specific client devices to access my network (via wired or wireless).
How can I do that?
1.
Visit
http://tplinkmodem.net
, and log in with the your TP-Link ID or password you set
for the router.
2.
Go to
Advanced
>
Security
>
Access Control
and enable
Access Control.
3.
Select the access mode to either block (recommended) or allow the device(s) in the
list.
To block specific device(s)
1 ) Select
Blacklist
and click
Save
.
