TP-Link TD-W8151N User Manual Download Page 87 | Manualshive

Page: 87 / 87

background image

TD-W8151N

150Mbps Wireless N ADSL2+ Modem Router User Guide

79

Appendix C: Technical Support

Technical Support



For more troubleshooting help, go to:

http://www.tp-link.com/en/support/faq



To download the latest Firmware, Driver, Utility and User Guide, go to:

http://www.tp-link.com/en/support/download



For all other technical support, please contact us by using the following details:

Global

Tel: +86 755 26504400
E-mail: [email protected]
Service time: 24hrs, 7 days a week

UK

Tel: +44 (0) 845 147 0017
E-mail: [email protected]
Service time: 24hrs, 7 days a week

Turkey

Tel: 444 19 25 (Turkish Service

）

E-mail: [email protected]
Service time: 9:00 AM to 9:00 PM
7 days a week

Ukraine

Tel: 0-800-505-508
E-mail: [email protected]
Service time: Monday to Friday
14:00 PM to 22:00 PM

Brazil

Toll Free: 0800-770-4337 (Portuguese Service)
E-mail: [email protected]
Service time: Monday to Saturday
08:00 AM to 08:00 PM

France

Tel: +33 (0) 820 800 860 (French service)
Email: support.fr @tp-link.com
Fee: 0.118 EUR/min from France
Service time: Monday to Friday 9:00 AM to 6:00
PM (Except French Bank holidays)

Russian Federation

Tel: 8 (499) 754-55-60
8 (800) 250-55-60 (toll-free call from any RF
region)
E-mail: [email protected]
Service time: From 10:00 to 18:00
(Moscow time)
*Except weekends and holidays in Russian
Federation

Switzerland

Tel: +41 (0) 848 800998 (German Service)
E-mail: [email protected]
Fee: 4-8 Rp/min, depending on rate of different
time
Service time: Monday to Friday 9:00 AM to 6:00
PM. GMT+ 1 or GMT+ 2
(Daylight Saving Time)

Singapore

Tel: +65 62840493
E-mail: [email protected]
Service time: 24hrs, 7 days a week

USA/Canada

Toll Free: +1 866 225 8139
E-mail: [email protected]
Service time: 24hrs, 7 days a week

Australia & New Zealand

Tel: AU 1300 87 5465
NZ 0800 87 5465
E-mail: [email protected]
Service time: 24hrs, 7 days a week

Italy

Tel: +39 0230519020
E-mail: [email protected]
Service time: Monday to Friday
9:00 AM to1:00PM, 2:00PM to 6:00 PM

Indonesia

Tel: (+62) 021 6259 135
E-mail : [email protected]
Service time : Monday to Friday
9:00 -12:00; 13:00 -18:00
*Except public holidays

Malaysia

Tel: 1300 88 875465 (1300 88TPLINK)
Email: [email protected]
Service time: 24hrs, 7 days a week

Poland

Tel: +48 (0) 801 080 618 / +48 22 7217563 (if
calls from mobile phone)
E-mail: [email protected]
Service time: Monday to Friday
9:00 AM to 5:00 PM. GMT+1 or GMT+2
(Daylight Saving Time)

Germany / Austria

Tel: +49 1805 875465 (German Service)
+49 1805 TPLINK
E-mail: [email protected]
Fee: 0.14 EUR/min from the German fixed
phone network and up to 0.42 EUR/min from
mobile phone
Service time: Monday to Friday 9:00 AM to 6:00
PM. GMT+ 1 or GMT+ 2
(Daylight Saving Time in Germany)
*Except bank holidays in Hesse

«
...
85
86
87

Summary of Contents for TD-W8151N
























































































Reviews:

No comments

Related manuals for TD-W8151N

Brand: Ruckus Wireless Pages: 102

Brand: Aztech Pages: 2

Ultrastar Serv24 S2122-N24-4

Brand: HGST Pages: 36

Brand: Raven Pages: 33

Brand: LevelOne Pages: 146

Brand: Digisol Pages: 73

Wireless Kit 108MBPS

Brand: Topcom Pages: 100

Brand: Crestron Pages: 44

Brand: Bosch Pages: 28

Brand: Bosch Pages: 44

Brand: Bosch Pages: 40

Conettix ITS-D6686-INTL

Brand: Bosch Pages: 10

Brand: Bosch Pages: 12

DIVAR IP 3000 DIP-3040-00N

Brand: Bosch Pages: 20

Conettix ITS-D6686-UL

Brand: Bosch Pages: 12

Brand: Bosch Pages: 8

DIVAR IP 6000 (2U)

Brand: Bosch Pages: 28

Brand: Bosch Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands