-83-
Source:
Select the Source IP Range for the entries, including the following
three ways:
IP/MASK: Enter an IP address or subnet mask. ("0.0.0.0/32"
means any IP).
Group: Select a predefined group of users. You can set the group
on4.4.1 Group.
ANY: means for any users.
Destination:
Select the Destination IP Range for the entries, including the following
two ways:
IP/MASK: Enter an IP address or subnet mask. ("0.0.0.0/32"
means any IP is acceptable).
ANY: means for any users.
Effective Time:
Specify the time for the entry to take effect.
Description:
Give a description for the entry.
Priority:
Select this option to specify the priority for the added entries. The
latest enabled entry will be displayed at the end of the list by default.
List of Rules
You can view the information of the entries and edit them by the Action buttons. The smaller the
value is, the higher the priority is.
The first entry in Figure 4-46 indicates: The TELNET packets transmitted from the hosts within the
network of 192.168.0.0/24 will be not allowed to pass through the router at 8:00-20:00 from
Tuesday to Saturday.
Note:
●
For the users in the private network and not being set access rule, the default Policy is Allow.
●
To specify all IP addresses, type “0.0.0.0 / 32” in the Policy field.
●
For detailed setting of subnet mask, please refer to
Appendix B FAQ
.
