75
Chapter 15
Specify Your Network Settings
15. 1. 3. Reserve LAN IP Addresses
You can view and add a reserved address for a client. When you specify an IP address
for a device on the LAN, that device will always receive the same IP address each time
when it accesses the DHCP server. If there are some devices in the LAN that require
permanent IP addresses, please configure Address Reservation on the router for the
purpose.
Follow the steps below to reserve an IP address for your device.
1.
Visit
http://tplinkmodem.net
, and log in with your TP-Link ID and the password you
set for the router.
2.
Go to
Advanced
>
Network
>
LAN Settings
page and select
IPv4
.
3.
Scroll down to locate the
Address Reservation
table and click
Add
to add an address
reservation entry for your device.
4.
Click
Scan
and select the device for which you want to reserve IP address. Or enter
the
MAC Address
manually.
5.
Specify the
IP Address
which will be reserved by the router.
6.
Check to
Enable this entry
and click
Save
to make the settings effective.
15. 2. IPv6 LAN Settings
Based on the IPv6 protocol, the modem router provides two ways to assign IPv6 LAN
addresses:
• Configure the RADVD (Router Advertisement Daemon) address type
• Configure the DHCPv6 Server address type
