70
Chapter 14
VPN Server
8 ) Enter the
Pre-Shared Key
for IKE authentication. Then keep
Perfect Forward
Secrecy
enabled.
Note:
Make sure Site A and Site B use the same key.
9 ) Leave the
Advanced
Settings as default value. Then click
Save
.
Note:
The
Status
column is
Down
after the configuration, and it will change to
UP
only when Site A and Site B are
communicating via the VPN connection.
3. Configuration on Site B (remote network). Refer to step 2 configuration on Site A
and make sure that Site A and Site B use the same
pre-shared keys
and
Perfect
Forward Secrecy
settings.
4. Check the VPN connection. You can ping site B’ LAN IP from your computer in site
A to verify that the IPSec VPN connection is set up correctly.
Tips:
To check the VPN connection, you can do the following.
1. On the host in Site A, press
[Windows Logo]
+
[R]
to open Run dialog. Input “
cmd
” and hit
OK
.
2. In the CLI window, type in “ping 192.168.2.x” (“192.168.2.x” can be IP address of any host in Site B). Then press [Enter].
3. If Ping proceeds successfully (gets replies from host in Site B), the IPSec connection is working properly now.
5. Now IPSec VPN is implemented to establish a connection.
