67
Chapter 4
Configure the Router in Wireless Router Mode
4. Click
Choose File
to locate the downloaded firmware file, and click
Upgrade
.
4. 18. 6. Factory Defaults
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the
router.
2. Go to
System Tools
>
Factory Defaults
. Click
Restore
to reset all settings to the
default values.
• The default
Username
: admin
• The default
Password
: admin
• The default
IP Address
: 192.168.0.1
• The default
Subnet Mask
: 255.255.255.0
4. 18. 7. Backup & Restore
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file in your computer for future use and restore the router to
the previous settings from the backup file when needed.
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the
router.
2. Go to
System Tools
>
Backup & Restore
.
Summary of Contents for Archer A50
Page 1: ...REV4 0 0 1910012347 User Guide AC1200 Wireless Dual Band Router...
Page 5: ...5 9 11 Statistics 97 5 10 Log Out 98 FAQ 99...
Page 15: ...Chapter 3 Log In This chapter introduces how to log in to the web management page of router...
Page 105: ...100 3 Click LAN settings and deselect the following three options and click OK...
