TP-Link Archer A50, User Manual

Page: 55 / 121

50
Chapter 4 Configure the Router in Wireless Router Mode
7. Select Allow the packets specified by any enabled access
control policy to pass through the Router as the default filter
policy and click Save .
Now only the specific host(s) can visit the target(s) within the
scheduled time period.
4. 13. Advanced Routing
Static Routing is a form of routing that is configured manually by a network administrator
or a user by adding entries into a routing table. The manually-configured routing
information guides the router in forwarding data packets to the specific destination.
4. 13. 1. Static Route List
1. Visit http://tplinkwifi.net , and log in with the username and password you set for the
router.
2. Go to Advanced Routing > Static Route List .
¾
To add static routing entries:
1. Click Add New .
2. Enter the following information .
• Destination IP Address - The Destination Network is the address of the network
or host that you want to assign to a static route.
Done!