TP-Link Archer A50, User Manual

Page: 58 / 121

53
Chapter 4 Configure the Router in Wireless Router Mode
¾
To add a Bandwidth control rule:
1. Click Add New .
2. Enter the information as the figure shown below.
3. Click Save .
4. 15. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
a network device’s IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with a matching IP address in
the ARP list, but with an unrecognized MAC address.
4. 15. 1. Binding Settings
1. Visit http://tplinkwifi.net , and log in with the username and password you set for the
router.
2. Go to IP & MAC Binding > Binding Settings .
3. Select Enable for ARP Binding.
4. Click Save .
¾
To add IP & MAC Binding entries:
1. Click Add New .
2. Select the Bind checkbox.