TP-Link Archer A50, User Manual

Page: 69 / 121

64
Chapter 4 Configure the Router in Wireless Router Mode
¾
To set time automatically:
1. Select your local time zone .
2. Enter the address or domain of the NTP Server I or NTP Server II .
3. Click Get GMT to get time from the internet if you have connected to the internet.
¾
To set Daylight Saving Time:
1. Select Enable DaylightSaving .
2. Select the start time from the drop-down list in the Start field.
3. Select the end time from the drop-down list in the End field.
4. Click Save .
Note:
This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log
in to the router successfully; otherwise, time-based functions will not take effect.
4. 18. 2. LED Control
The LED Control allows you to turn on or off the LEDs on your device according to a
specific time schedule.
1. Visit
http://tplinkwifi.net , and log in with the username and password you set for the
router.
2. Go to System Tools > LED Control .
3. Enable the Night Mode .
4. Set the LED Off Time and click Save .
4. 18. 3. Feedback
This page allows you to send your questions or suggestions to us, so that we can
resolve your issues and keep improving product features to give you a better network
experience. For technical problems, it is recommended to attach the configuration file
or system log of the device to help us investigate your case.