background image

VSS3    

1

Dear Customer,

Congratulations on your purchase of this alarm system which has been designed and 
manufactured to the highest automotive standards utilising the latest technology for total reliability 
as per European Community directives.

Please read this manual to get the full benefit of the system. 
We suggest that you keep this manual in the car. It will be easier for you to find the information in 
the event of emergency. Your authorised retailer will be pleased to clarify any queries you may have 
with the system or its operation if you cannot find the information you need in this manual or in 
the chapter ‘Troubleshooting guide’.

Immunity information

-  If any loss is caused by fire, action of a third party, or other accidents, or the user’s deliberate or 

accidental misuse, incorrect use, or use under abnormal conditions, repair of the product will 
be charged to the user.

-  Toyota Motor Europe NV/SA is not liable for any incidental loss caused by the use or non-use of 

this product.

-  Toyota Motor Europe NV/SA is not liable for any damages or incidents consequent to 

intentional misuse, accidental misuse, or third party use of the device.

-  The alarm system will not prevent the car from being stolen.

Read this manual thoroughly before using the VSS3. 

Always keep this owner’s manual in the vehicle.

Summary of Contents for VSS3-Hilux



















Reviews: