16
VSS3
Problem
Possible causes
Possible solutions
LED
Always ON
You are in programming mode.
Close bonnet to exit program
mode.
Always OFF
System problem.
See No arming.
30 seconds ON
System is still in pre-arm phase.
Wait 30 sec. to enter arm state.
Blinking fast at IG
ON
Garage mode is activated.
See garage mode.
Blinking slow
Alarm system is activated.
No arming
Fuse is broken.
Check ECU-B fuse.
Central unit is broken or
disconnected.
Contact your authorized retailer.
Wire harness is damaged.
Contact your authorized retailer.
6. Glossary
ARMING:
Operational state in which the product is protecting the vehicle.
DISARMING: Product in the operational state that allows the vehicle to be started without setting
off the alarm.
PRE-ARM:
Functional state preceding the arm mode, in which the product does not give any
alert.
TAMPER:
Removal, cutting or disconnection of the power or communication wires.
BUZZER:
The internal loudspeaker of the alarm system used as a beeper.
PIN CODE: Personal Identification Number, used to deactivate the alarm sytem.
