SCION tC
2008-
ILLUMINATED
DOOR
SILLS
Procedure
Page 8 of 17 pages
Issue: C 06/13/07
(m)
Secure the power wire from the lighted side
sill to vehicle harness using a wire tie.
(Fig. 2-9)
(n)
Route lighted side sill harness toward front
of car along side of vehicle harness. Secure
the illuminated sill wire to vehicle harness
with three wire ties in the areas shown.
(Fig. 2-10)
(o)
Place a protective blanket on top of the side
sill.
3.
Install Driver Side Power Harness
(a)
Connect power harness to the driver’s side
sill harness. (Fig. 3-1)
(1)
Wrap connected connectors with thick
foam tape.
(b)
Secure the sill harness to the OE harness as
shown with two wire ties. (Fig. 3-2)
(1)
Do not wire tie to any air bag harnesses.
Wire Cutters
Wire Ties
Wire Cutters
Fig.
2-10
Fig.
2-9
Wire tie
Sill Connector Plug
Fig. 3-1
Power Harness
Fig. 3-2
Wire Ties
Wire Cutters
