SCION tC
2008-
ILLUMINATED
DOOR
SILLS
Procedure
Page 16 of 17 pages
Issue: C 06/13/07
(g)
Reinstall the driver and passenger side cowl
cover and door scuffs.
(h)
Reinstall the glove box under panel.
(i)
Reconnect the vehicle’s negative battery
cable.
(1)
Position the negative battery cable at the
original factory position. (Fig. 7-1)
(2)
Tighten the nut with 4.1 N-m (36 lbf-in)
of torque.
(3)
Do not touch the positive battery terminal
with any tool when replacing the cable.
(j)
Initialize the passenger side window controls.
(1)
Refer to the factory repair manual for
proper procedures.
(k)
Initialize the sunroof.
(1)
Refer to the factory repair manual for
proper procedures.
8.
Completing the Installation
(a)
Perform vehicle accessory function checks.
(b)
If required, remove the DCC fuse located in
the engine compartment.
(c)
Using an approved cleaner, clean any
smudges, fingerprints, or dirt off of the front
door sill surfaces.
(d)
Clean up and remove any trash.
Fig. 7-1
