SCION
iM
2016 -
INTERIOR LIGHT KIT
Procedure
Page 19 of 24 pages
Issue: C 01/28/2016
DIO
(d)
Wrap the connector with the provided foam
tape (Fig. 8-3).
(e)
Route the main harness (pink harness)
towards the LH Light Module and wire tie it
in two locations (Fig. 8-4).
CAUTION:
Do not secure the harness to the
hood release cable (dashed red line, Fig. 8-4).
(f)
Connect the 5 pin connector to the light
module.
(g)
Route the main harness (pink line) above and
around the steering wheel column, towards
the RH Light Module. Wire tie the harness
in three locations and tape the harness in two
locations (Fig. 8-5).
(h)
Route the main harness (pink line) behind the
radio area and secure it with a wire tie to the
slot in the white plastic wire box (Fig. 8-6).
Fig. 8-3
Foam tape
Fig. 8-4
Wire tie #6
Wire tie #5
Fig. 8-5
#1 #2
Foam tape
#7 #8 #9
Wire tie
Fig. 8-6
Wire tie #10
