SCION
iM
2016 -
INTERIOR LIGHT KIT
Procedure
Page 9 of 24 pages
Issue: C 01/28/2016
DIO
(4)
Pull the glove box towards the rear of the
vehicle to detach the 2 hinges (Fig. 2-16).
3.
Prepare the Light Controller ECU.
(a)
Remove the adhesive backing on the thin
foam tape and secure it onto the bracket (Fig.
3-1).
(b)
Orient the ECU as shown with the 5 pin ECU
harness pointing toward the top of the
bracket (Fig. 3-2).
Fig. 2-16
Fig. 3-1
Thin foam tape
Fig. 3-2
Bottom of bracket
Top of bracket
5-pin ECU harness
