SCION
iM
2016 -
INTERIOR LIGHT KIT
Procedure
Page 15 of 24 pages
Issue: C 01/28/2016
DIO
(2)
Position the pins in the proper orientation
before inserting them into the connector
(Fig. 6-5).
(3)
Check each wire after inserting it to make
sure the terminals are locked properly.
(4)
Press down on the pin lock to lock in the
terminals.
(5)
Wrap the switch connector with half of a
piece of foam tape.
(h)
Verify the completed assembly (Fig. 6-6).
(i)
Install the switch into the left side panel
(Fig. 6-7).
7.
Install the Lights.
(a)
Install the driver side light.
(1)
Remove the nut (Fig. 7-1).
Fig. 6-5
Fig. 6-6
Fig. 6-7
Fig. 7-1
Mounting nut
Mounting slot
Clutch pedal
12mm socket & ratchet
