Toyota Prius+ Owner'S Manual Download Page 119

Page: 119 / 580

119

1-4. Adjustable components (seats, mirrors, steering wheel)

Be
fo

riv

PRIUS +_OM_OM47821E_(EE)



Adjusting the height of the head restraints (front seats)



Adjusting the second and third seats head restraint

Always raise the head restraint one level from the stowed position when
using.

CAUTION



Head restraint precautions

Observe the following precautions regarding the head restraints. Failure to
do so may result in death or serious injury.



Use the head restraints designed for each respective seat.



Adjust the head restraints to the correct position at all times.



After adjusting the head restraints, push down on them and make sure
they are locked in position.



Do not drive with the head restraints removed.

Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.

Summary of Contents for Prius+





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius+

Reviews:

Related manuals for Prius+

Brands by name

Popular brands

Toyota Prius+, Owner'S Manual

Search results

Summary of Contents for Prius+

Reviews:

Related manuals for Prius+

Brands by name

Popular brands