Toyota Prius+ Owner'S Manual Download Page 341

Page: 341 / 580

341

3-1. Using the air conditioning system and defogger

Interior fe

atures

PRIUS +_OM_OM47821E_(EE)

Rear window and outside rear view mirror defogger switch



Operating conditions

The “POWER” switch is in ON mode.



The outside rear view mirror defoggers

Turning the rear window defogger on will turn the outside rear view mirror
defoggers on.

CAUTION



When the outside rear view mirror defoggers are on

Do not touch the outside surface of the rear view mirrors, as they can
become very hot and burn you.

NOTICE



To prevent 12-volt battery discharge

Do not leave the rear window defogger on longer than necessary when the
hybrid system is off.

Defoggers are used to defog the rear window, and to remove rain-
drops, dew and frost from the outside rear view mirrors.

Turns the rear window and
outside rear view mirror defog-
gers on/off

The defoggers will automati-
cally turn off after approxi-
mately 15 minutes.

Summary of Contents for Prius+





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius+

Reviews:

Related manuals for Prius+

Brands by name

Popular brands

Toyota Prius+, Owner'S Manual

Search results

Summary of Contents for Prius+

Reviews:

Related manuals for Prius+

Brands by name

Popular brands