manualshive.com logo in svg

Toyota Prius+, Owner'S Manual

The Toyota Prius+ is a highly efficient and eco-friendly hybrid vehicle. Enhance your driving experience with its spacious design and advanced technology. Find a comprehensive user manual with detailed instructions for free download at manualshive.com, providing you with essential information to fully utilize this exceptional automotive marvel.

Share
Download
background image

524

5-2. Steps to take in an emergency

PRIUS +_OM_OM47821E_(EE)

Start the engine of the second vehicle. Increase the engine
speed slightly and maintain at that level for approximately
5 minutes to recharge the battery of your vehicle.
Maintain the engine speed of the second vehicle and start
the hybrid system of your vehicle by turning the “POWER”
switch to ON mode.
Make sure the “READY” indicator comes on. If the indicator
light does not come on, contact any authorized Toyota
dealer or repairer, or another duly qualified and equipped
professional.
Once the hybrid system has started, remove the jumper
cables in the exact reverse order from which they were con-
nected.
Close the exclusive jump starting terminal cover, and rein-
stall the fuse box cover to its original position.

When installing, first hook the fuse box cover onto the two rear
tabs.

Once the hybrid system starts, have the vehicle inspected at any
authorized Toyota dealer or repairer, or another duly qualified and
equipped professional as soon as possible.

STEP 

4 

STEP 

5 

STEP 

6 

STEP

7

STEP

8

Summary of Contents for Prius+





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Prius+

Jeep Compass Overview Manual preview
Compass
Brand: Jeep Pages: 25
Warrior Products 10936 Installation Instructions preview
10936
Brand: Warrior Products Pages: 3
Romik 2137 2D Installation Instructions Manual preview
2137 2D
Brand: Romik Pages: 6
FormFit HD 23A 07 Installation Instructions preview
HD 23A 07
Brand: FormFit Pages: 4
Volvo 2004 V70 (Swedish) Användarmanual preview
2004 V70
Brand: Volvo Pages: 188
Honda 2011 Civic Sedan Vehicle Instruction Card preview
2011 Civic Sedan
Brand: Honda Pages: 5
Suzuki 990E0-54P56-000 Installers And Users Instructions preview
990E0-54P56-000
Brand: Suzuki Pages: 12
Jeep Cherokee 2000 Service Manual preview
Cherokee 2000
Brand: Jeep Pages: 1528
Cadillac 1997 Catera Owner Assistance Information preview
1997 Catera
Brand: Cadillac Pages: 34
ideus VV950 User Manual preview
VV950
Brand: ideus Pages: 159
GMC 2010 Tahoe Owner'S Manual preview
2010 Tahoe
Brand: GMC Pages: 120
Prime Tech H-066 User Manual preview
H-066
Brand: Prime Tech Pages: 6
Jeep 2014 Grand Cherokee SRT8 Owner'S Manual preview
2014 Grand Cherokee SRT8
Brand: Jeep Pages: 596
Skoda 1K0 051 437 Assembly Instructions preview
1K0 051 437
Brand: Skoda Pages: 4
Warn 70948 Installation Instructions preview
70948
Brand: Warn Pages: 5
RHOX LGT-381L Installation Instructions Manual preview
LGT-381L
Brand: RHOX Pages: 8
Subaru Legacy 2011 Quick Reference Manual preview
Legacy 2011
Brand: Subaru Pages: 19
rough country 921107830 Installation Instruction preview
921107830
Brand: rough country Pages: 4

Brands by name

Popular brands

Load more brands