Toyota OEKAKI 50, Instruction Manual

Page: 31 / 106

31
EN
9
To change the bobbin winding speed, press the
(function) button until the LED lights
up, and then select the speed with the and
(setting) buttons. (refer to page 47)
* The bobbin winding speed appears only briefly in the LED
display.
10
Press the (start/stop) button. Otherwise, step
on the foot controller to continue winding the
bobbin.
When bobbin winding becomes slow, press the
(start/stop) button again. Otherwise, release
the foot controller to stop bobbin winding.
11
Return the thread winding spindle by sliding it in
the direction of the arrow (1), and then remove the
bobbin from the thread winding spindle and cut
the thread (2).
Note
• If the thread winding spindle is not returned, the needle
does not move and sewing is not possible.
1
2
Thread
winding
spindle