
59
1-2. Child safety
1
HILUX_OM_OM0K198E_(AE)
Fo
r s
afe
ty a
nd
se
cu
rity
Double-cab models: When securing some types of child restraint sys-
tems in rear seat, it may not be possible to properly use the seat belts
in positions next to the child restraint without interfering with it or
affecting seat belt effectiveness. Be sure your seat belt fits snugly
across your shoulder and low on your hips. If it does not, or if it inter-
feres with the child restraint, move to a different position. Failure to do
so may result in death or serious injury.
◆
Installing child restraint system using a seat belt
Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.
X
Front seat
Adjust the seatback angle to the most upright position. Move the
front seat fully rearward. (
→
P. 122)
If the head restraint interferes with your child restraint system, and
the head restraint can be removed, remove the head restraint. Oth-
erwise, put the head restraint in the upper most position. (
→
P. 127)
X
Rear seat
If the head restraint interferes with your child restraint system, and
the head restraint can be removed, remove the head restraint. Oth-
erwise, put the head restraint in the upper most position. (
→
P. 127)
Run the seat belt through the child restraint system and insert the
plate into the buckle. Make sure that the belt is not twisted.
Securely fix the seat belt to the child restraint system in accor-
dance to the directions enclosed with the child restraint system.
1
2
HILUX_OM_OM0K198E_(AE).book Page 59 Thursday, February 12, 2015 6:39 PM
NOT
FOR
REPRODUCTION