
432
7-3. Do-it-yourself maintenance
HILUX_OM_OM0K198E_(AE)
■
Replacing the following bulbs
If any of the lights listed below has burnt out, have it replaced by
your Toyota dealer.
●
Headlight low beams (vehicles with LED headlights)
●
Front position lights/daytime running lights (vehicles with LED
headlights)
●
Side turn signal lights
●
High mounted stoplight (if equipped)
■
When installing the rubber cover of the headlight (vehicles with halogen
headlights)
Ensure the rubber cover is securely attached.
■
LED lights
The headlight low beams (vehicles with LED headlights), front position lights/
daytime running lights (vehicles with LED headlights), side turn signal lights
(mirror mounted type) and high mounted stoplight (if equipped) consists of a
number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota
dealer to have the light replaced.
■
Condensation build-up on the inside of the lens
Temporary condensation build-up on the inside of the headlight lens does not
indicate a malfunction. Contact your Toyota dealer for more information in the
following situations:
●
Large drops of water have built up on the inside of the lens.
●
Water has built up inside the headlight.
Fit the rubber cover outer circumfer-
ence in firmly.
Fit the rubber cover around the light
bulb in until the light bulb plug can be
seen.
1
2
HILUX_OM_OM0K198E_(AE).book Page 432 Thursday, February 12, 2015 6:39 PM
NOT
FOR
REPRODUCTION