manualshive.com logo in svg

Toyota HILUX, Owner'S Manual, Page: 485 / 540

Share
Download
Toyota HILUX Owner'S Manual Download Page 485

483

8-2. Steps to take in an emergency

HILUX_OM_OM0K198E_(AE)

8

W
hen

 trou

bl

e ari

s

e

s

■

When recharging or replacing the battery (vehicles with smart entry &
start system)

●

In some cases, it may not be possible to unlock the doors using the smart
entry & start system when the battery is discharged. Use the wireless
remote control or the mechanical key to lock or unlock the doors.

●

The engine may not start on the first attempt after the battery has recharged
but will start normally after the second attempt. This is not a malfunction.

●

The engine switch mode is memorized by the vehicle. When the battery is
reconnected, the system will return to the mode it was in before the battery
was discharged. Before disconnecting the battery, turn the engine switch off. 
If you are unsure what mode the engine switch was in before the battery dis-
charged, be especially careful when reconnecting the battery.

■

When exchanging the battery

●

Use a battery that conforms to European regulations.

●

Use a battery with the same case size as the previous battery and an equiv-
alent 20 hour rate capacity (20HR) or greater.

• If the sizes differ, the battery cannot be properly secured.
• If the 20 hour rate capacity is low, even if the time period where the vehi-

cle is not used is a short time, the battery may discharge and the engine
may not be able to start.

●

For details, consult your Toyota dealer.

WARNING

■

When removing the battery terminals

Always remove the negative (-) terminal first. If the positive (+) terminal con-
tacts any metal in the surrounding area when the positive (+) terminal is
removed, a spark may occur, leading to a fire in addition to electrical shocks
and death or serious injury.

■

Avoiding battery fires or explosions

Observe the following precautions to prevent accidentally igniting the flam-
mable gas that may be emitted from the battery:

●

Make sure each jumper cable is connected to the correct terminal and that
it is not unintentionally in contact with any other than the intended terminal.

●

Do not allow the other end of the jumper cable connected to the “+” termi-
nal to come into contact with any other parts or metal surfaces in the area,
such as brackets or unpainted metal.

●

Do not allow the + and - clamps of the jumper cables to come into contact
with each other.

●

Do not smoke, use matches, cigarette lighters or allow open flame near
the battery.

HILUX_OM_OM0K198E_(AE).book  Page 483  Thursday, February 12, 2015  6:39 PM

NOT 

FOR 

REPRODUCTION

Summary of Contents for HILUX





























































































































































































































































































































































































































































































































































Reviews:

No comments