Toyota Highlander 2012 Owner'S Manual Download Page 321

Page: 321 / 604

345

3-2. Using the audio system

Inte

rior fe

atures

■

About the wrench

After using the included wrench, store it in the glove box for safekeeping.

■

Installing the antenna

Tighten the antenna by one
hand until it will not turn any
more.

Using the wrench, tighten the
antenna an additional 1/8th
turn (20 to 45 degrees) to
secure it in place.

After tightening the antenna,
remove the wrench.

STEP

Summary of Contents for Highlander 2012





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander 2012

Reviews:

Related manuals for Highlander 2012

Brands by name

Popular brands

Toyota Highlander 2012, Owner'S Manual

Search results

Summary of Contents for Highlander 2012

Reviews:

Related manuals for Highlander 2012

Brands by name

Popular brands