Toyota Highlander 2012 Owner'S Manual Download Page 505

Page: 505 / 604

W
h

en
t

ub
le

ise
s

531

5-2. Steps to take in an emergency

Follow the correction procedures.

After taking the specified steps to correct the suspected problem,
check that the warning light turns off.

Warning light

Warning light/Details

Correction procedure

Open door warning light
(warning buzzer)

Indicates that a door is not
fully closed.

Check that all doors are
closed.

Low fuel level warning
light

Indicates that remaining
fuel is about 2.2 gal. (8.3
L, 1.8 Imp. gal.) or less

Refuel the vehicle.

Driver’s seat belt
reminder light
(warning buzzer)

Warns the driver to fasten
his/her seat belt.

Fasten the seat belt.

(On the center

panel)

Front passenger’s seat
belt reminder light
(warning buzzer)

Warns the front passen-
ger to fasten his or her
seat belt.

Fasten the seat belt.

Automatic transmission
fluid temperature warning
light (vehicles without
multi-information display)

Indicates that the auto-
matic transmission fluid
temperature is too high.

Stop the vehicle in a safe
place and shift the shift
lever to P.
If the light does not go off,
contact your Toyota dealer.

Summary of Contents for Highlander 2012





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander 2012

Reviews:

Related manuals for Highlander 2012

Brands by name

Popular brands

Toyota Highlander 2012, Owner'S Manual

Search results

Summary of Contents for Highlander 2012

Reviews:

Related manuals for Highlander 2012

Brands by name

Popular brands