Toyota Highlander 2012 Owner'S Manual Download Page 524

Page: 524 / 604

550

5-2. Steps to take in an emergency

Stowing the flat tire, jack and all tools

Remove the center wheel ornament by pushing from the
reverse side.

Put the flat tire on the ground
with the outer side facing up and
install the holding bracket.

Be careful not to lose the wheel
ornament.

Turn the spare tire clamp bolt clockwise with a jack handle
and adapter socket until you hear a click.

Stow the jack and all tools.

STEP

■

After completing the tire change

The tire pressure warning system must be reset. (

→

P. 480)

STEP

Summary of Contents for Highlander 2012





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander 2012

Reviews:

Related manuals for Highlander 2012

Brands by name

Popular brands

Toyota Highlander 2012, Owner'S Manual

Search results

Summary of Contents for Highlander 2012

Reviews:

Related manuals for Highlander 2012

Brands by name

Popular brands