Toyota Highlander 2012 Owner'S Manual Download Page 194

Page: 194 / 604

216

2-4. Using other driving systems

■

Adjusting the set speed

To change the set speed, operate the lever until the desired set
speed is obtained.

Increases the speed

Decreases the speed

Fine adjustment: Momentarily
move the lever in the desired
direction.

Large adjustment: Hold the
lever in the desired direction.

The set speed will be increased or decreased as follows:

Fine adjustment: By approximately 1 mph (1.6 km/h) each time the
lever is operated.

Large adjustment: The set speed can be increased or decreased con-
tinually until the lever is released.

■

Canceling and resuming the constant speed control

Pulling the lever toward you
cancels the constant speed
control.

The speed setting is also can-
celed when the brakes are
applied.

Pushing the lever up
resumes the constant
speed control.

Resuming is available when
the vehicle speed is more
than approximately 25 mph
(40 km/h).

Summary of Contents for Highlander 2012





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander 2012

Reviews:

Related manuals for Highlander 2012

Brands by name

Popular brands

Toyota Highlander 2012, Owner'S Manual

Search results

Summary of Contents for Highlander 2012

Reviews:

Related manuals for Highlander 2012

Brands by name

Popular brands