Toyota Highlander 2012 Owner'S Manual Download Page 65

Page: 65 / 604

1-3. Adjustable components (seats, mirrors, steering wheel)

■

Adjusting the height of the head restraints (except second center seat
and third seats)

■

Adjusting the rear center seat head restraint

Always raise the head restraint one level from the stowed position when
using.

■

Removing the front and second seat outer head restraints

■

When using the third seat head restraints

To use

To fold

Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.

Pull the head restraint up while pushing
the lock release button.

Summary of Contents for Highlander 2012





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander 2012

Reviews:

Related manuals for Highlander 2012

Brands by name

Popular brands

Toyota Highlander 2012, Owner'S Manual

Search results

Summary of Contents for Highlander 2012

Reviews:

Related manuals for Highlander 2012

Brands by name

Popular brands