Toyota Celica 2003 Page 15 Owner'S Manual Download

Page: 15 / 284

’03MY CELICA U (L/O 0208)

2003 CELICA from Aug. ’02 Prod. (OM20809U)

Automatic operation (to open only):

Push the switch completely down and then
release it. The window will fully open. To

stop the window partway, lightly pull the

switch up and then release it.

OPERATING THE PASSENGER’S

WINDOW
Use the switch on the passenger’s side

of the center console.

The window moves as long as you hold

the switch.
To open: Push down the switch.

To close: Pull up the switch.

If you push in the window lock switch on

the instrument panel, the passenger’s win-

dow cannot be operated.

Summary of Contents for Celica 2003





























































































































































































































































































Search results

Summary of Contents for Celica 2003

Reviews:

Related manuals for Celica 2003

Brands by name

Popular brands

Toyota Celica 2003, Owner'S Manual

Search results

Summary of Contents for Celica 2003

Reviews:

Related manuals for Celica 2003

Brands by name

Popular brands