Toyota Celica 2003 Page 187 Owner'S Manual Download

Page: 187 / 284

’03MY CELICA U (L/O 0208)

152

2003 CELICA from Aug. ’02 Prod. (OM20809U)

NOTICE

Dinghy towing does not eliminate the
possibility of damage to your vehicle.

DINGHY TOWING TIPS
Before dinghy towing, be sure to ob-

serve the following in order to reduce

the damage to your vehicle.

1. Put the shift lever in neutral.
2. Turn the ignition switch to the “ACC”

position. Make sure the audio is turned

off and any item is not plugged into

the power outlet.

NOTICE

To avoid the locking of the steering
wheel, turn the ignition switch to the

“ACC” position.

3. Release the parking brake.

After dinghy towing, let the engine idle for

more than 3 minutes before driving the

vehicle.

NOTICE

Do not tow your vehicle from the
rear. This may cause serious damage

to your vehicle.

Your vehicle is designed primarily as a

passenger

−

carrying vehicle. Towing a

trailer will have an adverse effect on
handling, performance, braking, durability

and driving economy (fuel consumption,

etc.). Your safety and satisfaction depend
on the proper use of correct equipment

and cautious driving habits. For your

safety and the safety of others, you must
not overload your vehicle or trailer. Toyota

warranties do not apply to damage or

malfunction caused by towing a trailer for
commercial purposes. Ask your local

Toyota dealer for further details before

towing.

WEIGHT LIMITS

Before towing, make sure the total trailer
weight, gross vehicle weight, gross axle

weight and trailer tongue load are all with-

in the limits.
The total trailer weight and tongue load

can be measured with platform scales
found at a highway weighing station, build-

ing supply company, trucking company,

junk yard, etc.

Trailer towing

Summary of Contents for Celica 2003





























































































































































































































































































Search results

Summary of Contents for Celica 2003

Reviews:

Related manuals for Celica 2003

Brands by name

Popular brands

Toyota Celica 2003, Owner'S Manual

Search results

Summary of Contents for Celica 2003

Reviews:

Related manuals for Celica 2003

Brands by name

Popular brands